Standard Low D Whistle with Close Spacing via Chimney Extenders (key of low D only)

$600.00$670.00

A true game changer in low whistles. 

At long last, people with hands of almost any size can easily play the low D whistle. 

For complete information, please watch the video below.

If you wish us to require a signature for delivery, please note that in the comments field of your order.

Note that this Standard Bore version of the low D whistle differs from the Big Bore version. This Standard Bore version has a narrower bore. It requires less air. Its high notes play more easily, and, as a trade-off, its lowest and highest notes are quieter. Beginners on the whistle who want to play a low D whistle may find this one easier to play than the Big Bore low D whistle. (Also, the Big Bore version is available in more keys than just low D.) Soon I will make a video that compares the two. Also, for the present, the photos on this page show the Big Bore version of the whistle. The finger hole placement and spacing is the same with these two versions of the low D whistle.

These low whistles are easier to handle and play than any others on the market. Their very close finger hole spacing represents an immense breakthrough, enabling, at long last, those with small or compromised hands to play the low whistle, with its beautiful, flute-like sonority.

Before this model became available, many people found low D whistles uncomfortable or impossible to play. Now many players, even those with larger hands (such as Grey Larsen), prefer this close-spaced low whistle for its vastly-increased ease of play which permits much more agility with ornamentation techniques and complex or rapid passages. Grey Larsen reports that he can play this low D whistle using the end-pads of all six fingers, just as he does on smaller whistles. No more need for “the pipers grip” and wide finger stretches.

The walls of this whistle are thick. This permits angled drilling of the finger holes, which form slanted chimneys that connect the top and bottom of each hole. These angled holes are extended into the bore by the use of small tubes – the chimney extenders.  (See diagram with the photos.) The tops of the holes – where the fingers touch – can therefore be placed very close together, as closely spaced as on a low G whistle, as you can see in the photos and the video.

The chimney extenders do not interfere with the whistle’s sound in any way. In the video (at approximately five minutes in) you can compare the sounds of standard and close-spaced Low D whistles.

The Carbony pennywhistles are our favorites of the fine handmade whistles. They follow in the footsteps of the legendary, highly sought-after (and rarely available) Michael Copeland whistles, in tone, response and conical-bore shape. Due to their carbon fiber bodies, Carbony whistles are virtually indestructible. They come with a lifetime warranty.

The Carbony Standard Bore Low D Whistle is very satisfying to play – the high notes of the second octave speak very easily. Intonation is superb, and of course they are tunable, with their two-piece design. Each one comes with a fabric drawstring carrying pouch.

You may wish to get a thumb rest for your low whistle as well. This makes it easier to hold and support the whistle, and we highly recommend it.

The Standard Bore Low D Whistle with Close Spacing via Chimney Extenders comes only in the key of D.

The tapered design allows for rapid passage articulation and optimal volume balance in all registers. Includes anodized aluminum serialized laser engraved fipple body with ebonite tip.

Extra Thumb-Hole Options: You may choose to add a thumb hole for the top-hand thumb and/or bottom-hand thumb. The top thumb hole adds $20 to the whistle’s cost, while the bottom thumb hole adds $50. (The bottom thumb hole requires the installation of an additional chimney.) The top-hand thumb hole gives an additional and very useful way to finger the flat seventh (i.e. C-natural on a D whistle), this in addition to a cross-fingering for C. The bottom-hand thumb hole gives an easy and agile way to finger the flat third (i.e. F-natural on a D whistle), a much more practical method than using a half-hole fingering for this note. These thumb-holes also make it possible to play the Irish “roll” ornament on C-natural and F-natural (speaking in D whistle terms). F-natural strikes and finger vibrato also become possible. Note that when you are not playing C-natural and F-natural with the thumb holes, you must keep these holes closed. The top thumb hole is located behind and about halfway between the top two finger holes, while the bottom thumb hole is located behind and just above the fifth hole (i.e. the middle finger of bottom hand).

Description

During the pandemic we have instituted a 30-day return policy for Carbony whistles, based on the date the instrument arrives at your door instead of the purchase date. This provides a no-risk opportunity to try a Carbony and return it to us for a refund if you feel it is not right for you. We will pay 50% of the cost of return shipping. 

From the Carbony website: The thin wall process of the Carbony tapered whistle design gives warm response of the lower octave. When playing with other instruments these notes are rarely heard, but not with Carbony™ composite! Our material resonance enhances lower frequencies and mutes upper register shrillness producing a volume balance in all registers.

All whistles now have our revision four fipple design. Our patented two-piece design enables machining accuracy of 0.001″. Our two-piece assembly also facilitates optimal material selection. The blade/body is machined from aluminum and anodized for hardness, creating a stiff precise blade for maximum oscillation. The tip/windway is machined from marbled ebonite, the same material used to make saxophone and clarinet mouthpieces. Safe to put in mouth and durable enough to honor our lifetime warranty. The interface of the carbon fiber body is precision ground to mate with the fipple to form a tuning slide required in all professional grade whistles.

The Carbony™ tapered design is based on the Copeland tradition and we were fortunate to have Michael Copeland play an early design and offer both encouragement and his perspective of whistle making.

Carbony™  instruments are:

• Virtually indestructible – material will not crack, break or rot

• Geometrically stable – over all temperatures and humidities

• Stays as built – no warping or drying out over time

Additional information

Weight .5 lbs
Dimensions 23 × 1 × 1 in
Thumb Holes

Add Top Thumb Hole, Add Botton Thumb Hole, Add Both Thumb Holes, No Thumb Hole

Reviews

There are no reviews yet.

Be the first to review “Standard Low D Whistle with Close Spacing via Chimney Extenders (key of low D only)”